Comparing accuracy in guided endodontics: dynamic real-time navigation, static guides, and manual approaches for access cavity preparation - an in vitro study using 3D printed teeth.

OBJECTIVES: To assess root canal localization accuracy using a dynamic approach, surgical guides and freehand technique in vitro. MATERIALS AND METHODS: Access cavities were prepared for 4 different 3D printed tooth types by 4 operators (n = 144). Deviations from the planning in angle and bur positioning were compared and operating time as well as tooth substance loss were evaluated (Kruskal-Wallis Test, ANOVA). Operating method, tooth type, and operator effects were analyzed (partial eta-squared statistic). RESULTS: Angle deviation varied significantly between the operating methods (p < .0001): freehand (9.53 ± 6.36°), dynamic (2.82 ± 1.8°) and static navigation (1.12 ± 0.85°). The highest effect size was calculated for operating method (ηP²=0.524), followed by tooth type (0.364), and operator (0.08). Regarding deviation of bur base and tip localization no significant difference was found between the methods. Operating method mainly influenced both parameters (ηP²=0.471, 0.379) with minor effects of tooth type (0.157) and operator. Freehand technique caused most substance loss (p < .001), dynamic navigation least (p < .0001). Operating time was the shortest for freehand followed by static and dynamic navigation. CONCLUSIONS: Guided endodontic access may aid in precise root canal localization and save tooth structure. CLINICAL RELEVANCE: Although guided endodontic access preparation may require more time compared to the freehand technique, the guided navigation is more accurate and saves tooth structure.

Robot-Assisted and Haptic-Guided Endodontic Surgery: A Case Report.

There has been a significant increase in robot-assisted dental procedures in the past decade, particularly in the area of robot-assisted implant placement. The objective of this case report was to assess the initial use of the Yomi Robot's assistance and haptic guidance during endodontic microsurgery. The robot was used during the osteotomy and root-end resection of the first and second upper left premolars. The report aims to inform clinicians of the initial implementation of this cutting-edge technology in endodontics and its potential to enhance endodontic microsurgery. The Yomi Robot was used in performing osteotomy and root-end resection during apical surgery in a patient presenting with symptomatic upper left first and second premolars. The treatment procedure was decided after clinical examination, chart data, and radiographic examinations, which showed periapical lesions on both premolars, taking into consideration the failed endodontic retreatment on the first premolar, the post and ceramic coronal restorations on both teeth, and the desire of the patient to save them. The Yomi Robot system provides auditory, visual, and physical guidance to clinicians during surgery while using a cone-beam computed tomography scan for precision planning with greater accuracy and minimized potential for human error. Further studies are needed to prepare a protocol for robotic-guided procedures in endodontics.

Accuracy of Magnetic Resonance Imaging in Clinical Endodontic Applications: A Systematic Review.

INTRODUCTION: The development of dedicated coils and new magnetic resonance imaging (MRI) sequences has led to an increase in image resolution and a reduction in artifacts. Consequently, numerous studies have demonstrated the utility of MRI as a nonionizing alternative to cone-beam computed tomographic imaging. The aim of this systematic review was to evaluate the accuracy of MRI in clinical applications in endodontics. METHODS: A literature search was conducted using PubMed, Embase, Scopus, and Web of Science. The inclusion criteria encompassed studies evaluating MRI applications in endodontics, covering tooth and root canal anatomy, root canal working length, pulp vitality and regeneration, the effect of caries on dental pulp, guided endodontics, periapical lesions, and root cracks/fractures. The selected studies examined both ex vivo and in vivo human teeth using clinical MRI units. Two researchers independently screened the studies, applied the eligibility criteria, and assessed the potential risk of bias using the revised QUADAS-2 tool (Bristol Medical School, University of Bristol, UK). RESULTS: A total of 18 studies were included in this systematic review, demonstrating that the use of MRI has a high diagnostic value in endodontics. In the evaluation of tooth and root canal anatomy, pulp vitality and regeneration, the effect of caries on dental pulp, periapical lesions, and root cracks/fractures, MRI's accuracy is comparable to or even higher than reference standards such as cone-beam computed tomographic imaging, micro-computed tomographic imaging, and histology. CONCLUSIONS: MRI has high potential accuracy for diagnosing various clinical endodontic tasks, except for root canal length, size of caries, and periapical lesion dimensions, which are overestimated in MRI.

Expert consensus on digital guided therapy for endodontic diseases.

Digital guided therapy (DGT) has been advocated as a contemporary computer-aided technique for treating endodontic diseases in recent decades. The concept of DGT for endodontic diseases is categorized into static guided endodontics (SGE), necessitating a meticulously designed template, and dynamic guided endodontics (DGE), which utilizes an optical triangulation tracking system. Based on cone-beam computed tomography (CBCT) images superimposed with or without oral scan (OS) data, a virtual template is crafted through software and subsequently translated into a 3-dimensional (3D) printing for SGE, while the system guides the drilling path with a real-time navigation in DGE. DGT was reported to resolve a series of challenging endodontic cases, including teeth with pulp obliteration, teeth with anatomical abnormalities, teeth requiring retreatment, posterior teeth needing endodontic microsurgery, and tooth autotransplantation. Case reports and basic researches all demonstrate that DGT stand as a precise, time-saving, and minimally invasive approach in contrast to conventional freehand method. This expert consensus mainly introduces the case selection, general workflow, evaluation, and impact factor of DGT, which could provide an alternative working strategy in endodontic treatment.

Pain Management and Endodontics: Rapidly Evolving Science Benefits Patient Care.

Pain management and endodontics represent two separate but very much interrelated disciplines. Advances in both fields have resulted in significant improvements in the predictable and comfortable delivery of patient care. From the utilization of cone-beam computed tomography (CBCT) imaging, the use of biomaterials, and enhanced irrigation in endodontics, to greater understanding of pain physiology and treatment, providers and patients alike are benefiting from rapidly evolving science. These two interrelated disciplines are among the most exciting in dentistry for both clinicians and researchers. The science and practice of clinical endodontics progresses quickly. Resultantly, virtually every clinician providing endodontic care gets to experience real changes in methodologies and technologies during their career. These advances have enhanced outcomes in both nonsurgical and surgical endodontics. Similarly, seismic shifts in pain management continue to occur, and significant advances in the understanding of pain physiology, as well as drugs and devices for the prevention and treatment of pain, have greatly improved patient care.

Guided Endodontic Surgery: A Narrative Review.

Background and objectives: Endodontic surgery has evolved over the last two decades. The use of state-of-the-art guided endodontic surgical procedures produces a predictable outcome in the healing of lesions of endodontic origin. The main objective of this review paper is to define and characterize guided surgical endodontics as well as its benefits and drawbacks by reviewing the most recent relevant scientific literature. Methods: A literature search was conducted using multiple databases comprising of MEDLINE (via PubMed), EMBASE, and Web of Science. The terms used for the search were 'guided endodontics', 'surgical endodontics', and 'endodontic microsurgery'. Results: In total, 1152 articles were obtained from the analysis of the databases. Unrelated articles from the available full text of 388 articles were excluded. A total of 45 studies were finally included in the review. Conclusions: Surgical-guided endodontics is a relatively new area of study that is still maturing. It has many applications such as root canal access and localization, microsurgical endodontics, endodontic retreatment, and glass fiber post removal. Additionally, it does not matter how experienced the operator is; the procedure can be completed for the patient in less time and provides greater accuracy and safety than conventional endodontics.

Novel method for augmented reality guided endodontics: An in vitro study.

OBJECTIVE: The aim of this study is to evaluate the accuracy in endodontics of a novel augmented reality (AR) method for guided access cavity preparation in 3D-printed jaws. METHODS: Two operators with different levels of experience in endodontics performed pre-planned virtually guided access cavities through a novel markerless AR system on three sets of 3D-printed jaw models (Objet Connex 350, Stratasys) mounted on a phantom. After the treatment, a post-operative high-resolution CBCT scan (NewTom VGI Evo, Cefla) was taken for each model and registered to the pre-operative model. All the access cavities were then digitally reconstructed by filling the cavity area using 3D medical software (3-Matic 15.0, materialize). For the anterior teeth and the premolars, the deviation at the coronal and apical entry points as well as the angular deviation of the access cavity were compared to the virtual plan. For the molars, the deviation at the coronal entry point was compared to the virtual plan. Additionally, the surface area of all access cavities at the entry point was measured and compared to the virtual plan. Descriptive statistics for each parameter were performed. A 95% confidence interval was calculated. RESULTS: A total of 90 access cavities were drilled up to a depth of 4 mm inside the tooth. The mean deviation in the frontal teeth and in the premolars at the entry point was 0.51 mm and 0.77 mm at the apical point, with a mean angular deviation of 8.5° and a mean surface overlap of 57%. The mean deviation for the molars at the entry point was 0.63 mm, with a mean surface overlap of 82%. CONCLUSION: The use of AR as a digital guide for endodontic access cavity drilling on different teeth showed promising results and might have potential for clinical use. However, further development and research might be needed before in vivo validation.

In vitro study on the accuracy of sleeveless guided endodontics and treatment of a complex upper lateral incisor.

PURPOSE: The present study aims to assess the accuracy of sleeveless guided endodontics for root canal treatment of severe pulp canal obliteration (PCO) in 3D printed jaws. Additionally, the treatment of a complex lateral incisor is presented to illustrate the use of sleeveless guides in a clinical situation. METHODS: Two cone-beam computed tomography (CBCT) volumes of an upper and lower jaw were selected to design 3D printed models with PCO. Virtual planning of the access cavities was performed from right to left second premolar. Then, the models were mounted into a phantom head to simulate an actual patient. Two operators with different levels of experience in endodontics performed guided access cavities. The handpiece was guided by guiding rails placed against each other on the sides of the tooth. A post-operative CBCT scan was taken for analysis. RESULTS: Eighty-eight guided access cavities (44 per operator) were drilled on eight 3D printed models. The mean length of the access cavities was 15.3 mm, with a mean coronal and apical deviation of 0.5 mm and 0.7 mm respectively. The mean angular deviation was 1.5°. No statistically significant difference was found between operators for the three measured parameters. CONCLUSIONS: This study demonstrates, within its limitations, that sleveless guides represent an accurate method for guided endodontic treatment. No statistically significant difference between operators was found when using the guide. CLINICAL SIGNIFICANCE: This method offers a valuable alternative to conventional endodontic guides with similar accuracy results.

A computational modeling method for root canal endoscopy using a specific CBCT filter: A new era in the metaverse of endodontics begins.

A contemporary technological revolution has started a new era in the metaverse of Endodontics, a world of virtual operational possibilities that use an exact replica of the natural structures of the maxillofacial complex. This study describes a modeling method for root canal endoscopy using modern cone-beam CT (CBCT) software in a series of clinical cases. The method consists in acquiring thin CBCT slices (0.10mm) in the coronal, sagittal, and axial planes. A specific 3D volume filter, the pulp cavity filter of the e-Vol DX CBCT software, was used to navigate anatomical root canal microstructures, and to scan them using root canal endoscopy. The pulp cavity filter should be set to synchronize CBCT scans from 2D mode - multiplanar reformations (MPR) - to 3D mode - volumetric reconstruction. This filter, when adopting the option of volumetric reconstruction, the developed algorithm leaves the dentin density in transparent mode so that the pulp cavity may be visualized. The algorithm applied performs the suppression (visual) of areas with dentin density. This ensures 3D visualization of the slices and the microanatomy of the root canal, as well as a dynamic navigation throughout the pulp cavity. This computational modeling method adds new resources to Endodontics, which may impact the predictability of root canal treatments positively. The virtual visualization of the internal anatomy of an exact replica of the canal ensures better communications, reliability, and clinical operationalization. Root canal endoscopy using this novel CBCT filter may be used for clinical applications together with innovative digital and virtual-reality resources that will be naturally incorporated into the principles of Endodontics.

Present status and future directions: Surgical endodontics.

Endodontic surgery encompasses several procedures for the treatment of teeth with a history of failed root canal treatment, such as root-end surgery, crown and root resections, surgical perforation repair and intentional replantation. Endodontic microsurgery is the evolution of the traditional apicoectomy techniques and incorporates high magnification, ultrasonic root-end preparation and root-end filling with biocompatible filling materials. Modern endodontic surgery uses the dental operating microscope, incorporates cone-beam computed tomography (CBCT) for preoperative diagnosis and treatment planning, and has adopted piezoelectric approaches to osteotomy and root manipulation. Crown and root resection techniques have benefitted from the same technological advances. This review focuses on the current state of root-end surgery by comparing the techniques and materials applied during endodontic microsurgery to the most widely used earlier methods and materials. The most recent additions to the clinical protocol and technical improvements are discussed, and an outlook on future directions is given. Whilst nonsurgical retreatment remains the first choice to address most cases with a history of endodontic failure, modern endodontic microsurgery has become a predictable and minimally invasive alternative for the retention of natural teeth.

Can the method of cbct interpretation influence endodontic diagnosis? / O método de interpretação da tcfc pode influenciar o diagnóstico endodôntico?

Objetivo: Este estudo avaliou a influência do método de visualização e análise do exame de tomografia computa-dorizada de feixe cônico (TCFC) no diagnóstico de afecções endodônticas. Materiais e métodos: Vinte casos clínicos contendo doze diferentes afecções endodônticas foram ana-lisados por dois especialistas em radiologia odontológica e um especialista em endodontia. Inicialmente, os avaliadores visualizaram os casos em Portable Document Format (PDF) contendo uma seleção de imagens digitais e, por consenso, descreveram suas hipóteses diagnósticas para cada caso. Após uma semana, os avaliadores reavaliaram os casos, desta vez utilizando reconstrução multiplanar em um visualizador de imagens no formato Digital Imaging and Communications in Medicine (DICOM). Novamente, por consenso, eles indicaram suas hipóteses diagnósticas. Resultados: Em 10% dos casos, houve discrepância entre os diagnósticos realizados utili-zando as seleções de imagens digitais em PDF e utilizando a reconstrução multiplanar. A visualização das imagens em PDF obteve sensibilidade de 0.714, especificidade de 0.966, e acurácia de 90%. Discussão: Na maioria destes casos, as afecções endodônticas identificadas utilizando o visuali-zador de imagens DICOM (reconstrução multiplanar) não foram detectadas quando visualizados os PDF de imagens pré-selecionadas. Conclusão: Embora mais estudos sejam necessários, os autores reiteram que a utilização de recons-truções multiplanares sempre são preferíveis comparadas à outras formas de análise da TCFC, para que se atinja o máximo potencial diagnóstico do exame de imagem.

Aim: This study evaluated the influence of the method used for visualization and analysis of cone-beam com-puted tomography (CBCT) on the diagnosis of endodontic conditions. Materials and methods: Twenty clinical cases containing twelve different endodontic conditions were analyzed by two specialists in dental radiology and one specialist in endodontics. Initially, the evaluators viewed the cases in Portable Document Format (PDF) containing a selection of digital images and, by consensus, described their diagnostic hypotheses for each case. One week la-ter, the evaluators reassessed the cases, this time using multiplanar reconstructions with a Digital Imaging and Communications in Medicine (DICOM) format image viewer. Once more, by consensus, they recorded their diagnostic hypotheses. Results: In 10% of the cases there was a discrepancy between the diagnoses made using preselected digital images in PDFs and by viewing multiplanar reconstructions. The visualization of the PDF images obtained a sensitivity of 0.714, specificity of 0.966, and 90% accuracy. Discussion: In the majority of these cases, endodontic conditions identified using the DICOM image viewer (multiplanar reconstruction) were not detected using the PDFs of preselected images. Conclusion: Although more studies are needed, the au-thors reiterate that using multiplanar reconstructions should always be preferred to other forms of analysis for CBCT, so that the maximum diagnostic potential of the imaging exam can be achieved.

Concordância entre medida de comprimento de trabalho por radiografia e localizador eletrônico foraminal na dentição decídua: revisão integrativa / Agreement between work length measurement by radiography and electronic foraminal locator in the primary dentition: an integrative review

Introdução: O estabelecimento do comprimento de trabalho (CT) é uma etapa fundamental para o sucesso do tratamento endodôntico, principalmente na dentição decídua. O exame radiográfico é um dos principais meios de definir o CT. A mensuração desse comprimento também pode ser obtida por meio de dispositivos eletrônicos. Objetivo: Revisar a literatura acerca da concordância entre a medida de CT por radiografia e localizadores eletrônicos foraminais (LEFs) na dentição decídua. Metodologia: A busca bibliográfica foi realizada nas bases de dados PubMed, Cochrane Library e BVS, seguindo uma estratégia de combinação de palavras-chave, filtrando apenas pesquisas clínicas. A seleção dos artigos foi realizada em duas etapas: através da leitura dos títulos e resumos e, em seguida, por meio da obtenção e leitura dos artigos completos selecionados. Resultados: sete artigos foram selecionados, publicados entre 2011 e 2020. Todos foram analisados quanto à qualidade metodológica e à caracterização como tamanho da amostra, objetivo, metodologia, resultados e conclusão. Todos possuíam os dados necessários para contemplar o objetivo desta pesquisa. O uso dos LEFs mostrou-se tão preciso quanto o método radiográfico (n=6), e, em um estudo, o método eletrônico foi superior ao radiográfico para determinação do CT. Conclusão: O método eletrônico possui eficácia na determinação do CT durante o tratamento endodôntico de dentes decíduos sendo comparável ao radiográfico.

Introduction: To establish the working length (CT) is a fundamental step toward the suc-cess of endodontic treatment. Also, the radiographic examination is one of the most important means of determining CT. This length can also be measured by electronic devic-es. Objective: To review the literature on the agreement between the CT measurement by radiography and electronic foraminal locators (LEF) in the primary dentition. Methodology: A bibliographic search was performed on PubMed, Cochrane Library, and BVS, using a keyword combination strategy and filtering only clinical research. The selection of the articles occurred in two stages: by reading the titles and abstracts, and by obtaining and reading the selected full articles. Results: Seven articles, published between 2011 and 2020, were selected and analyzed for methodological quality and characterized for sample size, objectives, methodology, results, and conclusion. They had the essential data to contemplate the purpose of this research. The use of LEF proved to be as accurate as of the radiographic method (n=6), and in one study, the electronic method was superior to the radiographic method for determining TC. Conclusion: The electronic method is effective in determining the CT during the endodontic treatment of primary teeth and is comparable to the radiographic one.

Endodontic Microbiology: A Bibliometric Analysis of the Top 50 Classics.

BACKGROUND: Citation analysis has emerged to play a significant role in recognition of the most useful areas of research. Endodontic microbiology has been a topic of interest for endodontists as well as periodontists and oral surgeons. This bibliometric analysis is aimed at identifying and reporting the characteristics of the top 50 cited articles on endodontic microbiology. METHODS: The articles were identified through a search on Web of Science (WoS), property of Clarivate Analytics database published on endodontic microbiology. The citation information of the selected articles was recorded. The Journal of Endodontics, International Endodontic Journal, Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology, Dental Traumatology, and Australian Endodontic Journal were searched in the search title. Descriptive and bivariate analyses were performed using a statistical software package SPSS. Statistical analysis was performed using Shapiro-Wilk, Kruskal-Wallis, Post hoc, Mann-Kendall trend, and Spearman-rank tests. RESULTS: The 50 most cited articles were published from 1965 to 2012 with citation count varying from 1065 to 103 times. The total citation counts of articles recorded were 11,525 (WoS), 12,602 (Elseviers' Scopus), and 28,871 (Google Scholar). The most prolific years in terms of publications were 2001, 2002, and 2003, with five publications each, followed by 2005 with four. The year with most citations was 1998, with 1,330 citations, followed by 1965 and 2001, with 1,065 and 1,015 citations, respectively. A total of 136 authors contributed to the top 50 most cited articles with 27 corresponding institutions from 12 different countries. The most common methodological design was in vitro study, followed by clinic-laboratory study, literature review, systematic review and meta-analysis, and animal study. CONCLUSIONS: The present study provided a detailed list of the top 50 most cited and classic articles on microbiology in endodontics. This will help researchers, students, and clinicians in the field of endodontics as an impressive source of information.

Use of Highly Accurate Devices for a First Lower Premolar Endodontic Treatment with Multiple Root Canals.

This case report highlights the importance of using a dental operating microscope (DOM) and ultrasonic endodontic tips (UETs) to locate all root canals in the lower first premolar. A 53-year-old woman presented to our clinic with pain in the lower right first premolar. After a detailed search using a DOM and UETs, three root canals were found, prepared with rotary HyFlex endodontic files, and obturated using the lateral condensation technique. At the five-year follow-up after treatment, the tooth was completely restored and fulfilling its function, with no signs or symptoms of any post-treatment flare-up.

Endodontic length measurements using cone beam computed tomography with dedicated or conventional software at different voxel sizes.

The aim of this study is to investigate the accuracies and the agreements of the 3D Endo software, conventional CBCT software Romexis Viewer at three voxel sizes, and the EAL ProPex Pixi in endodontic length measurements. Three hundred and twenty-nine root canals in 120 intact human extracted molars were accessed. The actual lengths (AL) and electronic lengths (EL) were measured using the ruler and electronic apex locator (EAL), respectively. Teeth were scanned using the CBCT at different voxel sizes (0.075, 0.10, and 0.15 mm). Root canal lengths were measured using 3D Endo with proposed length (3D-PL) by software, corrected length (3D-CL), Romexis Viewer. The Fisher's exact test, paired t-test and Bland-Altman plots were calculated to detect the agreements of the four methods with AL measurements. The ProPex Pixi measurements obtained the highest accuracy in the range of ± 0.5 mm. There was agreement between the 3D-PL and the 3D-CL with AL measurements at voxel size of 0.15 mm and at voxel size of 0.10 mm, respectively. The CBCT Romexis Viewer measurements agreed with AL at three voxel sizes. The conventional CBCT measurements using Romexis Viewer and dedicated software did not reach to the 100% accuracy in the range of ± 0.5 mm.

In vitro biocompatibility and bioactivity of calcium silicate­based bioceramics in endodontics (Review).

Calcium silicate­based bioceramics have been applied in endodontics as advantageous materials for years. In addition to excellent physical and chemical properties, the biocompatibility and bioactivity of calcium silicate­based bioceramics also serve an important role in endodontics according to previous research reports. Firstly, bioceramics affect cellular behavior of cells such as stem cells, osteoblasts, osteoclasts, fibroblasts and immune cells. On the other hand, cell reaction to bioceramics determines the effect of wound healing and tissue repair following bioceramics implantation. The aim of the present review was to provide an overview of calcium silicate­based bioceramics currently applied in endodontics, including mineral trioxide aggregate, Bioaggregate, Biodentine and iRoot, focusing on their in vitro biocompatibility and bioactivity. Understanding their underlying mechanism may help to ensure these materials are applied appropriately in endodontics.

Insight into the Reaction of Alexidine with Sodium Hypochlorite: A Potential Error in Endodontic Treatment.

Therapeutic success in endodontic treatment depends on successful infection control. Alexidine dihydrochloride (ALX) was recently proposed as a potential alternative to 2% chlorhexidine (CHX) as it possesses similar antimicrobial properties, expresses substantivity and does not produce p-chloroaniline (PCA) when mixed with sodium hypochlorite (NaOCl). However, the products released in this reaction have not been described to date. The aim of this study was to identify detected chemical compounds formed in the reaction of ALX and NaOCl with the ultra-high-performance liquid chromatography-mass spectrophotometry (UHPLC-MS) method and assess whether precipitates and PCA are formed in this reaction. Solutions of ALX were mixed with the equivalent volume of 2% and 5.25% (w/v) NaOCl solutions. As control, 2% (w/v) CHX was mixed with 2% and 5.25% (w/v) NaOCl. Samples were subjected to the UHPLC-MS analysis. The mixture of ALX and NaOCl resulted in a yellowish precipitate formation, the amount of which depended on NaOCl concentration. Interaction of ALX and NaOCl resulted in the production of aliphatic amines. No PCA was formed when NaOCl was mixed with ALX. However, for the first time, we identified the possible products of the interaction. The interaction between NaOCl and ALX results in the formation of aliphatic amines; therefore, these compounds should not be mixed during endodontic treatment.

Preparation and application of chitosan biomaterials in dentistry.

Chitosan is a biodegradable and biocompatible natural polysaccharide that has a wide range of applications in the field of dentistry due to its functional versatility and ease of access. Recent studies find that chitosan and its derivatives can be embedded in materials for dental adhesives, barrier membranes, bone replacement, tissue regeneration, and antimicrobial agent to better manage oral diseases. In this paper, we provide a comprehensive overview on the preparation, applications, and major breakthroughs of chitosan biomaterials. Furthermore, incorporation of chitosan additives for the modification and improvement of dental materials has been discussed in depth to promote more advanced chitosan-related research in the future.

Influência do acesso minimamente invasivo na fratura de dentes tratados endodonticamente - uma revisão de literatura / Influence of minimally invasive access on fracture of endodonti-cally treated teeth- a literature review

O acesso à cavidade pulpar é a etapa do tratamento endodôntico que tem como objetivo expor a embocadura dos canais radiculares. Por muito tempo, o formato ideal da cavidade era aquele que proporcionasse a criação de uma trajetória reta ao canal, com a remoção completa do teto da câmara pulpar. Porém, nas últimas décadas, foi investigado um desgaste excessivo de dentina que possibilita a redução da resistência do dente. Então, propuseram novo formato de cavidade de acesso, que permite a preservação máxima possível das estruturas de suporte, objetivando aumentar a resistência de dentes tratados endodonticamente. Apesar das vantagens, supostamente atribuídas aos acessos minimamente invasivos, esse formato tem sido questionado por dificultar a visibilidade da entrada dos canais, localização, e possibilidade de deixar áreas intocadas nas paredes dos canais. Diante disso, este trabalho realizou um levantamento bibliográfico a fim de verificar se há consistência científica quanto à interferência do acesso coronário na resistência dentária. Concluiu-se que o acesso minimamente invasivo não apresentou diferença quanto ao aumento da resistência à fratura de dentes tratados endodonticamente quando comparado ao acesso tradicional, entretanto, o tema ainda é relevante e os benefícios dessa técnica devem ser investigados clinicamente a longo prazo.

Access to the pulp cavity is the stage of endodontic treatment that aims to expose the mouth of the root canals. For a long time, creating a straight path to the canal, with the complete removal of the pulp chamber roof, was the ideal cavity format. However, in recent decades, excessive dentin wear, which makes it possible to reduce tooth strength, has been investi-gated. So, a new access cavity format, which allows the maximum possible preservation of the support structures, was proposed to increase the resistance of endodontically treated teeth. Despite the advantages supposedly attributed to minimally invasive accesses, this format has been questioned for hindering the visibility of the entrance to the channels, the location, and the possibility of leaving untouched areas on the walls of the channels. Therefore, this work carried out a bibliographical survey to verify the scientific consistency regarding the interference of coronary access in dental resistance. The minimally inva-sive access showed no difference regarding increased fracture resistance of endodontically treated teeth compared to the traditional access. However, the topic is still relevant, and its benefits, in the long term, should be clinically investigated.

Enfoque conservador en paciente con múltiples lesiones periapicales radiolúcidas: Abordaje combinado endodóntico-quirúrgico / Conservative approach in a patient with multiple radiolucent periapical lesions: Combined endodontic-surgical access

Se presenta el caso de un paciente varón de 43 años con lesiones periapicales radiolúcidas de origen endodóntico en dientes pilares de rehabilitación fija metalocerámica, que acude a consulta para valorar la posibilidad de mantener sus dientes. Tras la exploración clínica y radiológica mediante radiografías periapicales y tomografía computerizada de haz cónico (CBCT) se decide realizar un abordaje combinado endodóntico-quirúrgico. La evolución clínica fue favorable y los controles radiográficos y tomográficos mostraron la resolución de las lesiones radiolúcidas preexistentes. El retratamiento endodóntico combinado con la microcirugía periapical son herramientas eficaces en el tratamiento conservador de dientes con lesiones periapicales de origen endodóntico

In this case report, we present a 43-year old male patient with multiple periapical radiolucent lesions caused by endodontic failure in teeth supporting a metalloceramic prosthetic rehabilitation, who came to the office asking for any possibility to maintain his teeth. After clinical and radiological exploration with periapical x-rays and cone beam computer tomography (CBCT), we decided to use a combined endodontic-surgical approach. Clinical evolution was favourable, and radiologica - tomographic controls showed complete healing of periapical radiolucent lesions. Endodontic retreatment combined with periapical microsurgery are effective tools for conservative treatment in teeth with periapical lesions caused by endodontic failures